Section 23: ACCESSORIES
PA1562
11
5) MENU: This key has 2 functions
• Activation of the dimmer function (press less
than 1.5 seconds) during normal operation;
• Calling up the menu (press longer than 1.5
seconds, four menus can be called up).
Press the key once again to call up the
individual menus;
a) PICTURE= Functions for the image
setting;
b) USER= Selection of the system
function;
c) TIME= Setting time and date;
d) INSTALL= Setting the camera function
(e.g. mirror function);
6) BUSH FOR THE MONITOR CABLE OF THE
CONNECTION BOX
7) STANDBY DISPLAY
8) INFRARED RECEIVER
MONITOR MENU DISPLAY
The monitor (RV59 HD) is equipped with an On-
Screen Display (OSD) function which displays
date, camera, channel, mirror mode and
distance markings. These functions can be
selected on MENU. To calling up the menu,
press longer than 1.5 seconds. Four menus can
be called up. Press the key once again to call up
the individual menus.
For calling up the menu PICTURE press the key
MENU longer than 1.5 seconds. The menu
PICTURE appears.
Select the function (e.g. contrast) by pressing
the key SELECT repeatedly. The setting within
the function can be modified with the keys UP
and DOWN.
For calling up the menu USER press the key
MENU once again. The menu USER appears.
Select the function (e.g. SELECTION) by
pressing the key SELECT repeatedly as
necessary. The setting within the function can
be modified with the keys UP and DOWN.
POSSIBLE SETTINGS:
LANGUAGE: ENGLISH/GERMAN
(ENG/DEUT)
SCREEN
FORMAT:
NOR 4:3, picture format
4:3
WIDE, picture format 16:9
FULL, picture format 16:9
middle enlarge
USER
LANGUE ENG
SCREEN WIDE
TITLE ON
TIME ON
TITLE: CAMERA TITLE DISPLAY
ON/OFF
TIME: TIME DISPLAY ON/OFF
For calling up the menu TIME press the key
MENU once again. The menu TIME appears.
Select the function (e.g. DATE) by pressing the
key SELECT repeatedly as necessary. The
setting within the function can be modified with
the keys UP and DOWN.
TIME
TIME 08:25
DATE MAY01
YEAR 2005
- Hour-Month adjustable by UP BUTTON
- Minute/Date adjustable by DOWN
BUTTON
- Year adjustable by UP/DOWN BUTTON
For calling up the menu INSTALL press the key
MENU once again. The menu TIME appears.
Select the function (e.g. SELECTION) by
pressing the key SELECT repeatedly as
necessary. The setting within the function can
be modified with the keys UP and DOWN.
POSSIBLE SETTINGS:
INSTALL
REAR CAM1
CAM1 MIR
CAM2 NOR
REAR:
CAM1:
CAM2:
Selection of priority camera
(CAM1 or CAM2) which is
triggered by rear gear.
Selection of real picture or
mirrored picture for camera 1
Selection of real picture or
mirrored picture for camera 2
NOTE1
NOTE2
The distance mark will appear
on the picture of camera which
set as MIR (mirrored).
Engaging the reverse gear,
only distance mark will appear
on the mirrored camera picture
without any OSD. At the
moment, no keys are available
except UP/DOWN key for
moving distance bar.
BACK-UP CAMERA MODULE (Power box)
The connection line consists of 6 branch lines as
below:
To Next Page
Loading...
