QL-30/60 User Guide 125
17
Service Functions
Reset Service Counter
Note: Access only with service key inserted!
The printer has total and service counters.
• Total counter: The total counter contains the values for the entire service life of the printer
up to now. The values of the total counter are displayed in the Info menu and in the Status
print.
• Service counter: The service counter can be reset after more substantial maintenance or
repair work with the service key inserted. Here, it provides information on the printing output
since the last reset. The values of the service counter are displayed in the Status print.
The following data is recorded in both counters:
1) Insert service key into a USB host interface.
2) Start menu.
3) Select Service > Reset service counter.
The display shows Reset service counter.
4) Select Continue. The data recorded by the service counter is set to the value 0.
The status print can be used to check whether the values were reset.
Calibrate Label Sensor
Note: Access only with service key inserted!
Table 44: Total and service counter data
Data Description
Operative time Printer switch-on time
Number of labels Number of labels printed
Transfer printing Length of medium printed with transfer printing
Thermal printing Length of medium printed with thermal direct printing
To Next Page
Loading...
Need help?
General
