QL-30/60 User Guide 25
3
Touchscreen Display
The user can control the operation of the printer with the control panel (“Configuration” on page
79), for example:
• Issuing, interrupting, continuing and canceling print jobs
• Setting printing parameters, e.g. heat level of the printhead, print speed, interface
configuration, language and time of day
• Control stand-alone operation with a memory module
• Update the firmware
Many functions and settings can also be controlled by software applications or by direct
programming with a computer using the printer’s own commands.
Settings made on the touchscreen display make the basic settings of the label printer.
Note: It is advantageous, whenever possible, to make adaptations to various print jobs in the
software.
Start Screen
Table 1: Start screen
After switching on
To Next Page
Loading...
