QL-30/60 User Guide 143
19
FTP Printer Management
The File Transfer Protocol (FTP) allows you to manage and transfer files on the network via the
Ethernet interface or WLAN card. An FTP program (FTP client) is required which supports the
“binary” transfer mode to manage the printer. The printer functions as an FTP server.
FTP printer management is comprised of four functions:
• Direct printing via copying JScript or ZPL files
• Management of the memory media installed in the label printer
• IFFS management
• Firmware update
FTP Login
To establish an FTP connection, the client must be logged on to the server. The login type
depends on the client. The following information must be specified in any case, however:
• IP address of the label printer
• User name and password
Access to the printer management functions depends on the user name:
Note: The passwords can be changed in the “Setup” tab of the web interface. See “Setup Tab”
on page 97.
After logging on the FTP server is accessible in a manner similar to a Windows folder.
FTP Printing
Label files in JScript format (see Programming Manual) or in ZPL format can be printed directly
via FTP connection:
1) Establish an FTP connection with the user name ftpprint and the defined password
(Default: print)
Table 46: Default passwords
Function User name Default password
FTP printing, loading PPP
vouchers
ftpprint print
FTP access to storage
devices
ftpcard card
FTP firmware update ftpadmin admin
To Next Page
Loading...
Need help?
General
