EasyManuals Logo

QuickLabel QL-60 User Manual

QuickLabel QL-60
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Introduction
18 QL-30/60 User Guide
Do not use the device close to high-voltage power lines.
If the device is operated with the cover open, ensure that people‘s clothing, hair, jewelry
etc. do not come into contact with the exposed rotating parts.
The device or parts of it can become hot while printing. Do not touch during operation, and
allow to cool down before changing material and before disassembly.
Risk of crushing when closing the cover. Touch the cover at the outside only. Do not reach
into the swivel range of the cover.
Perform only those actions described in this user guide. Work going beyond this may only
be performed by trained personnel or service technicians.
Unauthorized interference with electronic modules or their software can cause
malfunctions.
Other unauthorized work on or modifications to the device can also endanger operational
safety.
Always have service work done in a qualified workshop, where the personnel have the
technical knowledge and tools required to do the necessary work.
There are various warning stickers on the device. They draw your attention to dangers.
Warning stickers must therefore not be removed, as then you and other people cannot be
aware of dangers and may be injured.
The maximum sound pressure level is less than 70 dB(A).
Danger: Danger to life and limb from power supply. Do not open the device casing.
Warning: This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Environment
Obsolete devices contain valuable recyclable materials that should be sent for recycling. Send
to suitable collection points, separately from residual waste.
The modular construction of the printer enables it to be easily disassembled into its component
parts. Send the parts for recycling.
The electronic circuit board of the device is equipped with a lithium battery. Take old batteries
to collection boxes in shops or public waste disposal centers.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QuickLabel QL-60 and is the answer not in the manual?

QuickLabel QL-60 Specifications

General IconGeneral
BrandQuickLabel
ModelQL-60
CategoryLabel Maker
LanguageEnglish

Related product manuals