Configuration
98 QL-30/60 User Guide
Security Tab
On the “Security” tab the access rights for several printer functions can be set. The tab contains
the same parameters as the Security menu of the Setup page. See “Setup Tab” on page 97.
Figure 29: “Security” tab on the printer web interface
To change a parameter:
1) Locate parameter in the tree structure.
2) Set the value of the parameter at the right end of the concerning line.
A prompt to enter user name and password appears. See “Security” on page 77.
3) Enter user name and password and click OK.
To Next Page
Loading...
