QL-30/60 User Guide 53
7
Fault Correction
Error Display
The appearance of an error will be shown on the display:
Figure 20: Error display
The error treatment is pending on the error type. See “Error Messages and Fault Correction”
on page 54.
The display offers the following possibilities to continue after an error occurred:
Table 10: Button in the error display
Repeat The print job will be continued after clearing the error cause.
Cancel The print job will be cancelled.
Feed The media feed will be synchronized. Following the print job
can be continued.
Ignore The error message will be ignored. The print job will be
continued possibly with limited performance.
Save log The error does not allow print operation.
For detailed analysis several system files can be saved on an
external memory.
To Next Page
Loading...
Need help?
General
