QuickLabel QL-60 User Manual

Configuration
QL-30/60 User Guide 93
Time
• Start menu.
• Select Setup > Time.
Table 34: Parameters of the Setup > Time menu
Icon Parameter Meaning Default
Date Setting of the system date in the format
DD.MM.YYYY.
The print output of the date occurs in the
format set via the Country parameter.
The date can also be changed via
software. The change is not saved
permanently, however.
-
Time Setting the system time in the
HH:MM:SS format. When changing the
time, ensure that the Timezone, Daylight
saving and Date parameters are set
correctly.
The time can also be synchronized
automatically via the internet using the
Ethernet interface. The print output of
the time occurs in the format set via the
Country parameter.
The time can also be changed via
software. The change is not saved
permanently, however.
-
Time zone Adaptation of the time display of the
printer to the time zone in relation to
UTC (Universal Time Coordinated).
UTC+1
Daylight saving Selection of the daylight saving
regulation applicable for the region. The
time is then changed automatically.
EU
Time
synchronization
Activation of a service to synchronize
date and time of the printer.
NTP
> Time server IP address of the time server -

QuickLabel QL-60 Specifications

General

Brand	QuickLabel
Model	QL-60
Category	Label Maker
Language	English