QL-30/60 User Guide 17
1
Introduction
Instructions
Important information and instructions in this documentation are designated as follows:
Danger: Draws attention to an exceptionally great, imminent danger to your health or life due
to hazardous voltages. Draws attention to a danger with high risk which, if not avoided, may
result in death or serious injury.
Warning: Draws attention to a danger with medium risk which, if not avoided, may result in
death or serious injury.
Caution: Draws attention to a danger with low risk which, if not avoided, may result in minor
or moderate injury.
Attention: Draws attention to potential risks of property damage or loss of quality.
Note: Advice to make work routines easier or on important steps to be carried out.
Intended Use
• The device is manufactured in accordance with the current technological status and the
recognized safety rules. However, danger to the life and limb of the user or third parties
and/or damage to the device and other tangible assets can arise during use.
• The device may only be used for its intended purpose and if it is in perfect working order,
and it must be used with regard to safety and dangers as stated in the user guide.
• The device is intended exclusively for printing suitable materials that have been approved
by the manufacturer. Any other use or use going beyond this shall be regarded as improper
use. The manufacturer/supplier shall not be liable for damage resulting from unauthorized
use; the user shall bear the risk alone.
• Usage for the intended purpose also includes complying with the user guide, including the
manufacturer‘s maintenance recommendations and specifications.
Safety Instructions
• The device is configured for voltages of 100 to 240 V AC. It must be plugged into a
grounded socket.
• Only connect the device to other devices which have a protective low voltage.
• Switch off all affected devices (computer, printer, accessories) before connecting or
disconnecting.
• The device may only be used in a dry environment. Do not expose it to moisture (sprays of
water, mists, etc.).
• Do not use the device in an explosive atmosphere.
To Next Page
Loading...
Need help?
General
