QL-30/60 User Guide 145
20
Storage Devices
Label descriptions, graphics, fonts, and database information can be saved for the long-term
on memory media.
Note: Always create a backup copy of external devices in case of a malfunction.
Suitable Storage Devices
External Devices
• USB flash drive at USB host interface
• SD cards
Internal Device
• approx. 50 MB flash memory inside the printer (Internal Flash File System IFFS)
Installation
Note: For external storage devices only!
• Slide SD card contact-side first into the matching slot until it latches. To unlatch SD card
press it shortly into the slot and remove it.
or
• Connect USB flash drive to a USB host interface.
Attention: Risk of data loss! Do not remove the storage device while it is being accessed.
Directory Structure
On storage devices connected to the printer, the following directory structure is automatically
generated when uploading files:
Table 47: Directory structure
Folder name Contents
fonts Font files
images Graphic files
labels Label description files
misc Firmware, PPP, Setup and TMP files
To Next Page
Loading...
Need help?
General
