Fault Correction
58 QL-30/60 User Guide
Horizontal white lines in the
print image
Printer is used with the
backfeed > smart in the cut
or peel-off mode
Set the backfeed > always
in the setup. See “Printing”
on page 79.
Print image is irregular, one
side is lighter
Printhead is dirty Clean the printhead. See
“Cleaning the Printhead” on
page 51.
Head locking system not
adjusted
Adjust the head locking
system. See “Setting the
Head Locking System” on
page 44.
Table 12: Problem solution (Continued)
Problem Cause Remedy
To Next Page
Loading...
Need help?
General
