Radware Alteon User Manual

Alteon Application Switch Operating System Application Guide
Open Shortest Path First (OSPF)
Document ID: RDWR-ALOS-V2900_AG1302 147
2. Configure a simple text password up to eight characters for each OSPF IP interface in Area 0 on
Alteons 1, 2, and 3.
3. Enable OSPF authentication for Area 2 on Alteon 4.
4. Configure a simple text password up to eight characters for the virtual link between Area 2 and
Area 0 on Alteons 2 and 4.
Example Configure MD5 Authentication
This example uses the configuration illustrated in Figure 20 - Authentication Example, page 146.
1. Enable OSPF MD5 authentication for Area 0 on Alteons 1, 2, and 3.
2. Configure MD5 key ID for Area 0 on Alteons 1, 2, and 3.
3. Assign MD5 key ID to OSPF interfaces on Alteons 1, 2, and 3.
4. Enable OSPF MD5 authentication for Area 2 on Alteon 4.
5. Configure MD5 key for the virtual link between Area 2 and Area 0 on Alteons 2 and 4.
6. Assign MD5 key ID to OSPF virtual link on Alteons 2 and 4.
>> # /cfg/l3/ospf/if 1
>> OSPF Interface 1 # key test
>> OSPF Interface 1 # /cfg/l3/ospf/if 2
>> OSPF Interface 2 # key test
>> OSPF Interface 1 # /cfg/l3/ospf/if 3
>> OSPF Interface 3 # key test
>> # /cfg/l3/ospf/aindex 2/auth password
>> # /cfg/l3/ospf/virt 1/key alteon
>> # /cfg/l3/ospf/aindex 0/auth md5
>> # /cfg/l3/ospf/md5key 1/key test
>> # /cfg/l3/ospf/if 1
>> OSPF Interface 1 # mdkey 1
>> OSPF Interface 1 # /cfg/l3/ospf/if 2
>> OSPF Interface 2 # mdkey 1
>> OSPF Interface 1 # /cfg/l3/ospf/if 3
>> OSPF Interface 3 # mdkey 1
>> # /cfg/l3/ospf/aindex 2/autn md5
>> # /cfg/l3/ospf/md5key 2/key alteon
>> # /cfg/l3/ospf/virt 1/mdkey 2

Radware Alteon Specifications

General

Model	Alteon
Manufacturer	Radware
Layer	Layer 4-7
Type	Application Delivery Controller (ADC)
Features	Load balancing, SSL offloading, application acceleration, DDoS protection
Form Factor	Virtual Appliance