Alteon Application Switch Operating System Application Guide
High Availability
580 Document ID: RDWR-ALOS-V2900_AG1302
Peer Synchronization
Starting with version 28.0, you can define up to five (5) peers for each ADC-VX. This enables you to
plan your system according to considerations such as risk, resource availability and internal
organizational priorities. For more information on vADCs, see ADC-VX Management, page 403
.
Figure 91 - Example Peer Synchronization Topology, page 580
is an example topology for a set of
Alteons that use peer synchronization:
Figure 91: Example Peer Synchronization Topology
Configuring Peer Synchronization
To configure peer synchronization, you must:
1. Configure peer switches (Alteons) for your Alteon (see To configure peers, page 581
)
2. Associate the peer switches to vADCs (see To associate peer switches to a single vADC,
page 581)
To Next Page
Loading...
