Alteon Application Switch Operating System Application Guide
High Availability
Document ID: RDWR-ALOS-V2900_AG1302 577
To enable and disable mirroring for a filter
To display mirroring statistics
Note: Due to the difference in the amount of physical memory and session capacity between
different Alteon models, not all sessions can be synchronized. Session synchronization works
correctly if the same model Alteons are used in VRRP HA topologies.
Automate Session Mirroring
Session mirroring can be automated to synchronize sessions from master to backup at the
configured time and frequency. Time is specified as hour/minute/date/month/year, and frequency is
specified as daily, weekly, or monthly. Based on this, configuration mirroring is done at every
configured period.
For example, if the frequency is configured as weekly (w), mirroring is performed on the date it is
configured once a week. If frequency is configured as monthly (m), mirroring is done on the date it
is configured once a month.
To set time and frequency for session mirroring
1. Enter the following command:
2. Specify the time and frequency for session mirroring.
The following is the sample output:
>> Main # /cfg/slb/filt <Filter Number> /adv/mirror {enable|disable}
>> Main # /stats/slb/mirror
/cfg/l3/vrrp/autosmir
>> Main# /cfg/l3/vrrp/autosmir
Enter hour in 24-hour format [21]: 20
Enter minutes [10]: 5
Enter the date [08]: 02
Enter the month [10]: 09
Enter the Year [08]: 08
Enter the interval [d/w/m]: m
To Next Page
Loading...
Need help?
General