Alteon Application Switch Operating System Application Guide
ADC-VX Management
Document ID: RDWR-ALOS-V2900_AG1302 433
To replace an existing vADC with the configuration files of a physical, standalone ADC
1. Access the Active Switch Configuration Restoration menu.
2. When prompted, configure the following parameters:
If the selected vADC 1 already exists, the following message displays:
3. Enter y to replace the settings of the existing vADC.
4. When prompted, configure the following parameters:
Backing Up the Active vADC Configuration
The vADC Administrator can back up the vADC Administrator level configuration of an existing vADC
to a specified destination on the file server.
The Global Administrator can back up both the Global and vADC Administrator level configurations of
one or all existing vADCs to a destination on the file server.
This section includes the following topics:
• Backing Up the vADC Administrator Level Configuration, page 434
• Backing Up the Complete System, page 434
• Backing Up vADC Configuration Files from an Existing vADC, page 434
• Backing Up the Entire Administrator Environment, page 435
>> /cfg/gtcfg
Select import option [all/vadc/padc]: padc
Enter hostname or IP address of FTP/TFTP/SCP server:
Enter name of file on FTP/TFTP/SCP server:
Enter username for FTP/SCP server or hit return for TFTP server:
Enter password for username on FTP/SCP server:
Enter "scp" or hit return for FTP server:
Include private keys? [y/n]: y
Enter passphrase:
Reconfirm passphrase:
Enter vADC number: [1-28]: 1
vADC 1 is active do you wish to replace its current settings? [y/n] y
Enter hostname or IP address of FTP/TFTP/SCP server:
Enter name of file on FTP/TFTP/SCP server:
Enter username for FTP/SCP server or hit return for TFTP server:
To Next Page
Loading...
Need help?
General