Radware Alteon - Configuring Proxy IP Addresses

Alteon Application Switch Operating System Application Guide
Global Server Load Balancing
756 Document ID: RDWR-ALOS-V2900_AG1302
Configuring Proxy IP Addresses
Alteon at Site 1 in San Jose is configured with port 6 connecting to the default gateway and Real
Server 3 represents the remote server in Denver.
To configure the proxy address at Site 1 in San Jose for the remote server in Denver
1. Issue the following commands:
For more information on proxy IP addresses, see Client Network Address Translation (Proxy IP),
page 190.
2. If you want to configure proxy IP addresses on Site 2, issue the following commands on the
Denver Alteon:
>> # /cfg/slb/pip
(Select the Proxy IP Address menu)
>> Proxy IP address# type port
(Use port-based proxy IP)
>> Proxy IP address# add 200.200.200.4
(Set unique proxy IP address)
>> # /cfg/slb/port 6/proxy enable
(Enable proxy on the port)
>> Proxy IP address /cfg/slb/real 1/adv/proxy
dis
(Disable local real server proxy)
>> Real server 1# /cfg/slb/real 2/adv/proxy
dis
(Disable proxy for the local server)
>> Real server 2# /cfg/slb/real 3/adv/proxy
ena
(Enable proxy for the remote server)
>> Real server 3# apply
(Apply configuration changes)
>> Real server 3# save
(Save configuration changes)
>> # /cfg/slb/pip
(Select Proxy IP Address menu)
>> Proxy IP address# type port
(Use port-based proxy IP)
>> Proxy IP address# add 174.14.70.4
(Set unique proxy IP address)
>> # /cfg/slb/port 4/adv/proxy enable
(Enable proxy on the port)
>> Proxy IP address# /cfg/slb/real 1/adv/
proxy dis
(Disable local real server proxy)
>> Real server 1# /cfg/slb/real 2/adv/proxy
dis
(Disable local real server proxy)
>> Real server 2# /cfg/slb/real 3/adv/proxy
ena
(Enable proxy for the remote server)
>> Real server 3# apply
(Apply configuration changes)
>> Real server 3# save
(Save configuration changes)