Radware Alteon - Configure SLB Strings for HTTP Redirection

Alteon Application Switch Operating System Application Guide
Content-Intelligent Server Load Balancing Not Using Layer 7 Content Switching Rules
818 Document ID: RDWR-ALOS-V2900_AG1302
— Define virtual servers and services.
2. Turn on URL parsing for the virtual server for "User-Agent:" header.
3. Define the hostnames.
4. Configure the real servers to handle the appropriate load balancing strings.
Note: If you do not add a defined string (or add the defined string any), the server handles
any request.
Use the following command to add a defined string, where ID is the identification number of the
defined string.
Configure SLB Strings for HTTP Redirection
All of the following HTTP filtering redirection examples require configuring the SLB strings listed in
Table 70
. Each defined string has an associated ID number. A filter is then configured to redirect
from one configured string ID to another.
Note: Not all strings are used in each example.
>> # /cfg/slb/virt 1/service 80/http/httpslb browser
>> # /cfg/slb/layer7/slb/addstr "Mozilla"
>> Server Loadbalance Resource# addstr "Internet Explorer"
>> Server Loadbalance Resource# addstr "Netscape"
>> # /cfg/slb/real 2/layer7/addlb <ID>