Alteon Application Switch Operating System Application Guide
ADC-VX Management
452 Document ID: RDWR-ALOS-V2900_AG1302
To switch a vADC to a standalone ADC
1. Access the Active Switch Configuration Boot menu.
2.
Enter single to switch to standalone mode.
HA ID Management
ADC-VX is a virtual environment in which vADCs can be isolated, share physical links, connect to
shared areas of the network, and connect with other ADC form factors. This virtual environment
handles all network layers, transitions between standalone to virtual environments and application
resiliency.
Starting with version 28.1, ADC-VX supports
• Establishing a high availability relationship between vADCs with different IDs
• Establishing a high availability relationship between vADCs and standalone or virtual appliances
• Sharing a single link between up to 64 vADCs
>> Global - Main# /boot
------------------------------------------------------------
[Boot Options Menu]
single - Switch between ADC-VX and Standalone
vadc - Restart selected vADC process
dimage - Select default image
image - Select software image to use on next boot
conf - Select config block to use on next boot
gtimg - Download new software image via FTP/TFTP/SCP
reset - Reset switch
cur - Display current boot options
logen - Enable/Disable Enhanced Log Size
>> Global - Boot Options# single
Confirm Use last known standalone ADC configuration? [y/n]: y
ADC Application Images:
ID Version Downloaded Image status
-- ------- ---------- ------------
1 17:41:28 Sun Jan 13, 2013 Incompatible
2 28.1.0.0 12:45:39 Wed Mar 31, 2013 Active
3 28.1.0.2 17:41:28 Sun Jan 13, 2013 Assigned
4 28.1.0.3 12:45:39 Wed Mar 31, 2013 Assigned
5 28.1.0.4 17:41:28 Sun Jan 13, 2013 Idle
6 28.1.0.5 12:45:39 Wed Mar 31, 2013 Idle
7 28.1.0.6 17:41:28 Sun Jan 13, 2013 Idle
8 28.1.0.7 12:45:39 Wed Mar 31, 2013 Idle
9 28.3.0.0 17:41:28 Sun Jan 13, 2013 Assigned
10 28.4.0.0 12:45:39 Wed Mar 31, 2013 Idle
Select standalone ADC image (1-10) : 7
To Next Page
Loading...
Need help?
General