Radware Alteon - Creating a New Vadc from Configuration Files of a Physical ADC

Alteon Application Switch Operating System Application Guide
ADC-VX Management
432 Document ID: RDWR-ALOS-V2900_AG1302
Creating a New vADC from Configuration Files of a Physical ADC
The Global Administrator can create a new vADC from the configuration files of a physical,
standalone ADC, or to replace one or all existing vADCs with the configuration files of a physical,
standalone ADC.
To create a new vADC from the configuration files of a physical, standalone ADC
1. Access the Active Switch Configuration Restoration menu.
2. When prompted, configure the following parameters:
If the selected vADC 1 already exists, the following message displays:
3. Enter y to replace the existing vADC.
4. When prompted, configure the following parameters:
The following message displays:
5. Enter y to create a new vADC.
6. When prompted, configure the following parameters:
>> /cfg/gtcfg
Select import option [all/vadc/padc]: padc
Enter hostname or IP address of FTP/TFTP/SCP server:
Enter name of file on FTP/TFTP/SCP server:
Enter username for FTP/SCP server or hit return for TFTP server:
Enter password for username on FTP/SCP server:
Enter "scp" or hit return for FTP server:
Include private keys? [y/n]: y
Enter passphrase:
Reconfirm passphrase:
Enter vADC number: [1-28]: 1
vADC 1 already exists in the system, do you wish to replace it? [y/n]: y
Enter hostname or IP address of FTP/TFTP/SCP server:
Enter name of file on FTP/TFTP/SCP server:
Enter username for FTP/SCP server or hit return for TFTP server:
Enter vADC number: [1-28]: 1
vADC 1 doesn't exist. Do you wish to create vADC 1? [y/n]: y
Enter vADC name: Employee Portal
Enter throughput limit in Mbps: 1000
Do you want to configure edit the default acceleration settings? [y/n]: n