Alteon Application Switch Operating System Application Guide
ADC-VX Management
Document ID: RDWR-ALOS-V2900_AG1302 431
2. Enter y to replace the existing vADC.
3. When prompted, configure the following parameters:
Example Creating a New vADC from the Settings of the Recovery File
To create a vADC Administrator level backup file
1. Access the Active Switch Configuration Restoration menu.
If the selected vADC 1 already exists, the following message displays:
2. Enter y to replace the existing vADC.
3. When prompted, configure the following parameters:
Enter hostname or IP address of FTP/TFTP/SCP server:
Enter name of file on FTP/TFTP/SCP server:
Enter username for FTP/SCP server or hit return for TFTP server:
>> Global - Configuration# /c/gtcfg
Select Import option [all/vadc/padc]:vadc
Select vADC recovery type [all/vadmin]:all
Enter vADC number: [1-28]: 1
Enter hostname or IP address of FTP/TFTP/SCP server: 192.168.1.1
Enter name of file on FTP/TFTP/SCP server: OCS Service vADC
Enter username for FTP/SCP server or hit return for TFTP server: radware
Enter password for username on FTP/SCP server:
Enter "scp" or hit return for FTP server:
Include private keys? [y/n]: y
Enter passphrase:
Reconfirm passphrase:
Connecting to 192.168.1.1...
>> /cfg/gtcfg
Select import option [all/vadc/padc]: vadc
Select vADC recovery type [all/vadmin]: vadmin
Enter vADC number: [1-28]: 1
vADC 1 already exists in the system, do you wish to replace it? [y/n]: y
Enter hostname or IP address of FTP/TFTP/SCP server:
Enter name of file on FTP/TFTP/SCP server:
Enter username for FTP/SCP server or hit return for TFTP server:
To Next Page
Loading...
