Radware Alteon - Ipv6 VRRP Information

Alteon Application Switch Operating System Application Guide
High Availability
520 Document ID: RDWR-ALOS-V2900_AG1302
2. Assign an IPv6 address to the virtual router.
Use the command
address <IPv6_address> to assign an IPv6 address to the virtual router.
To enable IPv6 support on the virtual router group
After IPv6 support has been enabled on the virtual router, enable it on the virtual router group using
the /cfg/l3/vrrp/group/ipver v6 command.
IPv6 VRRP Information
The following are sample informational and statistical displays for IPv6 VRRP support.
To view IPv6 VRRP information
To view IPv6 VRRP statistics
>> Main# /info/l3/vrrp
VRRP information:
9: vrid 9, 2005:0:0:0:0:0:10:9
if 9, renter, prio 101, master
10: vrid 10, 10.10.10.50, if 1, renter, prio 101, master
20: vrid 20, 2005:0:0:0:0:0:20:20
if 20, renter, prio 105, master, server
>> Main# /stat/l3/vrrp6
--------------------------------------------------------------------------
VRRP6 statistics information:
vrrp6InAdvers: 7
vrrp6BadAdvers: 0
vrrp6OutAdvers: 86801
vrrp6BadVersion: 0
vrrp6BadVrid: 0
vrrp6BadAddress: 0
vrrp6BadData: 0
vrrp6BadInterval: 0