Radware Alteon - Authorization

Alteon Application Switch Operating System Application Guide
Securing Alteon
68 Document ID: RDWR-ALOS-V2900_AG1302
Authorization
Authorization is the action of determining a user's privileges on Alteon, and usually takes place after
authentication.
The mapping between TACACS+ authorization levels and Alteon management access levels is
described in Accounting, page 69
.
Table 5 displays TACACS+ levels with disabled privilege level mapping
(/cfg/sys/tacacs/cmap/dis):
Table 6 displays TACACS+ levels with enabled privilege level mapping
(
/cfg/sys/tacacs/cmap/ena):
Table 5: Alteon-Proprietary with Disabled Privilege Level Mapping for TACACS+
Alteon User Access Level TACACS+ level
user 0
slboper 1
l4oper 2
oper 3
slbadmin 4
l4admin 5
admin 6
slbview 7
crtadmin 7
slbadmin + crtmng 8
l4admin + crtmng 9
l1oper 10
l2oper 11
l3oper 12
l3admin 13
Table 6: Alteon-Proprietary with Enabled Privilege Level Mapping for TACACS+
Alteon User Access Level TACACS+ level
user 0, 1
slboper 2, 3
l4oper 4, 5
oper 6, 7, 8
slbadmin 9, 10, 11
l4admin 12, 13
admin 14, 15
slbview 16, 17
crtadmin 16, 17
slbadmin + crtmng 18, 19, 20
l4admin + crtmng 21, 22
l1oper 23