Alteon Application Switch Operating System Application Guide
ADC-VX Management
Document ID: RDWR-ALOS-V2900_AG1302 419
3. Click Submit to save your changes.
Basic ADC-VX Procedures
This section includes basic procedures for common ADC-VX operations.
• Creating a New vADC, page 419
• Resizing vADC Resources, page 427
• Assigning a VLAN Shared Interface to a vADC, page 428
Creating a New vADC
There are two options for creating vADCs:
• Creating a Basic vADC with the Creation Dialog, page 420
• Creating a vADC Using the vADC Menu, page 423
This section also includes:
• Enabling a Newly Created vADC, page 426
For the purposes of illustration, the example procedures in this section illustrate a vADC created for
a new Marketing Portal, which includes the following configuration:
• The new vADC is set with four VLANs.
• Only one VLAN is limited for a specific subnet (in the example, 100), while VLANs 101, 102, and
200 can use any IP subnet as required by the vADC Administrator.
For more details on the vADC Creation Dialog and the vADC Configuration menu, see the section on
the
/cfg/vadc menu in the Alteon Application Switch Operating System Command Reference.
Time Range Each chart displays a set of sampled data collected across a period of up
to a month. You can change the view based on set time periods in the
context of the chart.
Options:
• Real Time
• 1 Hour
• 1 Day
Default: Real Time
vADC Chart Selection You can create a customized chart that only displays selected vADCs.
Options:
• Add vADCs to the chart
• Remove vADCs from the chart
By default, 10 vADCs are displayed. You can optionally select specific
vADCs to display.
Default Mode: Display the first 10 vADCs created
Parameter Description
To Next Page
Loading...
Need help?
General