Alteon Application Switch Operating System Application Guide
ADC-VX Management
420 Document ID: RDWR-ALOS-V2900_AG1302
Creating a Basic vADC with the Creation Dialog
This example creates a basic vADC through the vADC Creation Dialog. The Creation Dialog is
invoked whenever you create a new vADC using the /cfg/vadc menu:
>> Global - Configuration# vadc
Enter vADC Number [1-]: 20
Do you wish to use vADC creation dialog? [y/n]: y
Do you wish to import a configuration file? [y/n] n
Enter vADC name: "Marketing Portal"
Enter throughput limit in Mbps: 1000
Do you want to edit the default acceleration settings? [y/n]: y
Enter SSL CPS limit: 400
Enter Compression limit: 200
Enter Cache RAM allocation:
2 Capacity Unit is Assigned
Enter VLAN Number to be added: 100-102, 200
Do you want to configure Allowed Networks? [y/n]: y
Enter VLAN Number: 100
Enter allowed IP version[v4,v6]: v4
Enter allowed IP network: 192.168.20.0
Enter subnet: 255.255.255.0
Do you want to assign additional IP network to the allowed list [y/n]? n
Enter vADC management IP address(v4 or v6): 10.1.1.1
Enter vADC management subnet mask: 255.255.255.0
Enter vADC management default gateway(v4 or v6): 10.1.1.100
Do you wish to use a different vADC ID for peer? [y/n]: n
Do you wish to use a different vADC name for peer?[y/n]: n
Enter vADC Peer management address(v4 or v6): 10.1.1.2
Enter vADC management subnet mask: 255.0.0.0
Enter vADC Peer management gateway address(v4 or v6): 10.1.1.100
Do you wish to enable vADC ? [y/n]:
>> Global - Configuration# apply
------------------------------------------------------------------
Apply complete; don't forget to 'save' updated configuration.
To Next Page
Loading...
Need help?
General