Alteon Application Switch Operating System Application Guide
Load Balancing Special Services
334 Document ID: RDWR-ALOS-V2900_AG1302
4. Apply and save the configuration.
Verifying WLM Configurations
The following are example commands to display and verify WLM configurations.
To display WLM information
To display statistics on Work Load Manager 11
>> Management Port# apply
>> Management Port# save
>> Main# /info/slb/wlm
Workload Manager Information:
ID IP address Port State
1 47.81.25.66 3860 Connected
10 47.80.23.245 3860 Not Connected
>> Main# /stats/slb/wlm 11
Workload Manager 11 Statistics:
Registration Requests: 1
Registration Replies: 1
Registration Reply Errors: 0
Deregisteration Requests: 1
Deregisteration Replies: 1
Deregisteration Reply Errors: 0
Set LB State Requests: 1
Set LB State Replies: 1
Set LB State Reply Errors: 0
Set Member State Requests: 0
Set Member State Replies: 0
Set Member State Reply Errors: 0
Send Weights Messages received: 47
Send Weights Message Parse Errors: 0
Total Messages with Invalid LB Name: 0
Total Messages with Invalid Group Name: 0
Total Messages with Invalid Real Server Name: 0
Messages with Invalid SASP Header: 0
Messages with parse errors: 0
Messages with Unsupported Message Type: 0
To Next Page
Loading...
