EasyManuals Logo

Radware Alteon User Manual

Radware Alteon
842 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #464 background imageLoading...
Page #464 background image
Alteon Application Switch Operating System Application Guide
Application Redirection
464 Document ID: RDWR-ALOS-V2900_AG1302
IP Proxy Addresses for NAT
Transparent proxies provide the following benefits when used with application redirection.
Application redirection is enabled when a filter with the redir action is applied on a port.
• With proxy IP addresses configured on ports that use redirection filters, Alteon can redirect
client requests to servers located on any subnet.
• Alteon can perform transparent substitution for all source and destination addresses, including
destination port remapping. This provides support for comprehensive, fully-transparent proxies.
No additional client configuration is needed.
The following procedure can be used for configuring proxy IP addresses:
1. Configure proxy IP addresses and enable proxy for the redirection ports.
Each of the ports using redirection filters require proxy IP addresses. For more information on
proxy IP addresses, see Client Network Address Translation (Proxy IP), page 190
.
2. In this example, proxy IP addresses are configured.
>> SLB port 3# /cfg/slb/pip
(Select proxy IP address menu)
>> Proxy IP address# type port
(Use port-based proxy IP)
>> Proxy IP Address# add 200.200.200.68
(Set proxy IP address)
>> Proxy IP Address# add 200.200.200.69
(Set proxy IP address)
>> Proxy IP Address# add 200.200.200.70
(Set proxy IP address)
>> Proxy IP Address# add 200.200.200.71
(Set proxy IP address)
>> Proxy IP Address# /cfg/slb/port 1
(Select Port 1)
>> SLB port 1# proxy ena
(Enable Proxy Port 1)
>> SLB port 1# /cfg/slb/port 2
(Select Port 2)
>> SLB port 2# proxy ena
(Enable Proxy Port 2)
>> SLB port 2# /cfg/slb/port 3
(Select Port 3)
>> SLB port 3# proxy ena
(Enable Proxy Port 3)
>> SLB port 3# /cfg/slb/port 4
(Select Port 4)
>> SLB port 4# proxy ena
(Enable Proxy Port 4)
>> SLB port 4# /cfg/slb/port 5
(Select Port 5)
>> SLB port 5# proxy ena
(Enable Proxy Port 5)
>> SLB port 5# /cfg/slb/port 6
(Select Port 6)
>> SLB port 6# proxy ena
(Enable Proxy Port 6)

Table of Contents

Other manuals for Radware Alteon

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Radware Alteon and is the answer not in the manual?

Radware Alteon Specifications

General IconGeneral
ModelAlteon
ManufacturerRadware
LayerLayer 4-7
TypeApplication Delivery Controller (ADC)
FeaturesLoad balancing, SSL offloading, application acceleration, DDoS protection
Form FactorVirtual Appliance