Radware Alteon - Page 423

Alteon Application Switch Operating System Application Guide
ADC-VX Management
Document ID: RDWR-ALOS-V2900_AG1302 423
— Display for the vADC Administrator
Creating a vADC Using the vADC Menu
The following is an example procedure for creating a vADC using the vADC menu.
To create a vADC using the vADC menu
1. Create a basic vADC using the /cfg/vadc menu.
2. Enter a name for the vADC in order to access it again using the vADC menu.
>> vADC 1 - Syslog# cur
Current syslog configuration:
Current Syslog Status: Enabled
>> vADC 1# sys/radius/cur
Current RADIUS status: Enabled
>> Global - Main# /cfg/
------------------------------------------------------------
[Configuration Menu]
sys - System-wide Parameter Menu
port - Port Menu
vadc - vADC Management Menu
dashboard - Dashboard Menu
l2 - Layer 2 Menu
dump - Dump current configuration to script file
ptcfg - Backup current configuration to FTP/TFTP server
gtcfg - Restore current configuration from FTP/TFTP server
>> Global - Main# /cfg/vadc 2
/cfg/vadc 2/name
>> vADC 4# name "Marketing Portal"
Current vADC name:
New vADC name: Marketing Portal
>> vADC 4# apply
------------------------------------------------------------------
Apply complete; don't forget to 'save' updated configuration.