Alteon Application Switch Operating System Application Guide
ADC-VX Management
422 Document ID: RDWR-ALOS-V2900_AG1302
2. The following cur commands display the status of vADC 1 with syslog and RADIUS servers
enabled:
— Display for the Global Administrator
(continued)
>> Global - vADC sys/syslog# ..
------------------------------------------------------------
[vADC system services Menu]
mmgmt - Management Port Menu
peer - Sync Peer Management Port Menu
sync - Assign target appliance for configuration sync
haid - Set HA-ID value
syslog - System Syslog Servers
radius - System RADIUS Servers
tacacs - System TACACS Servers
access - System Access Menu
idle - System timeout for idle CLI sessions
smtp - System SMTP host
cur - Display current vADC system parameters
>> Global - vADC system services# radius
------------------------------------------------------------
[vADC sys/RADIUS Menu]
delegate - Enable/Disable service delegation from global to vADC
lock - Lock access for vADC Administrator
unlock - Unlock access for vADC Administrator
cur - Display current settings
>> Global - vADC sys/RADIUS# delegate
Current Settings: disabled
Enter new Settings [d/e]:e
>> Global - vADC sys/RADIUS# apply
>> Global - System# syslog/cur
Current syslog configuration:
hst1 212.150.48.1, severity 7, facility 7
hst2 0.0.0.0, severity 7, facility 0
hst3 0.0.0.0, severity 7, facility 0
hst4 0.0.0.0, severity 7, facility 0
hst5 0.0.0.0, severity 7, facility 0, console enabled
syslogging all features
>> Global - System# radius/cur
Current RADIUS settings:
RADIUS authentication currently ON
Primary RADIUS Server 192.168.1.2
Secondary RADIUS Server 0.0.0.0
Primary Radius Server Secret is empty
Secondary Radius Server Secret is empty
Current RADIUS Server 192.168.1.2
RADIUS port 1645, retries 3, timeout 3
Secure backdoor access disabled
To Next Page
Loading...
Need help?
General