Alteon Application Switch Operating System Application Guide
ADC-VX Management
426 Document ID: RDWR-ALOS-V2900_AG1302
Enabling a Newly Created vADC
After creating a new vADC either through the Creation Dialog or the vADC menu, you must enable it
for it to be functional, as shown in the following example:
To enable a newly created vADC
>> Global - Configuration# vadc 4
------------------------------------------------------------
[vADC 1 Menu]
sys - Enable system services
add - Add Vlan
rem - Remove Vlan
name - vADC Name
cu - Update Capacity Units
limit - Maximum throughput allowed
allow - Allocate allowed IP networks
users - vADC Users Menu
swf - Enable/Disable software features
ena - Enable vADC
dis - Disable vADC
del - Delete vADC
cur - Display current vADC configuration
>> vADC 1# ena
Current status: disabled
New status: enabled
>> vADC 1#
To Next Page
Loading...
