Radware Alteon User Manual

Alteon Application Switch Operating System Application Guide
ADC-VX Management
Document ID: RDWR-ALOS-V2900_AG1302 425
You can add VLANs using one of the following syntaxes:
— vlan1 vlan2 vlan3 (one by one)
— vlan1-vlan3 vlan4 (range and list)
>> vADC 4# add 101-102 104
Current vADC 4 Layer2 interfaces:
Pending new vADC 4 Layer2 interfaces: 101 102 104
>> vADC 4# add 103
Current vADC 4 Layer2 interfaces:
Pending new vADC 4 Layer2 interfaces: 101-104
>> Global - vADC allowed IP networks# add
Enter allowed network number: 1
Current VLAN Number: 0
Pending new VLAN Number: 100
Enter new VLAN Number [1-4090]: 100
Enter new IP version[v4, v6]: v4
Current Network IP address: 0.0.0.0
Enter new Network IP address: 192.168.1.0
Current Network Mask: 0.0.0.0
Enter new Network Mask: 255.255.255.0
Current Settings:
vADC 1 allowed networks:
No allowed IP networks configured.
New Settings:
vADC 1 allowed networks:
Current IPv4 allowed networks:
Id Vlan NetAddress NetMask
---- ---- --------------- ---------------
1 100 192.168.1.0 255.255.255.0

Radware Alteon Specifications

General

Model	Alteon
Manufacturer	Radware
Layer	Layer 4-7
Type	Application Delivery Controller (ADC)
Features	Load balancing, SSL offloading, application acceleration, DDoS protection
Form Factor	Virtual Appliance