Radware Alteon User Manual

Alteon Application Switch Operating System Application Guide
Server Load Balancing
Document ID: RDWR-ALOS-V2900_AG1302 213
2. Globally enable load balancing.
3. Configure the IPv6 real servers.
4. Configure the IPv6 real server groups.
5. Enable client processing on the SLB ports.
6. Enable server processing on the SLB ports.
7. Create the IPv6 virtual servers.
8. Assign the desired service to the IPv6 virtual server group.
>> Main# /cfg/slb
>> Layer 4# on
>> Main# /cfg/slb/real 1
>> Real Server 1# ena
>> Real Server 1# ipver v6
>> Real Server 1# rip abcd:0:0:0:0:0:0:11
>> Main# /cfg/slb/real 2
>> Real Server 2# ena
>> Real Server 2# ipver v6
>> Real Server 2# rip abcd:0:0:0:0:0:0:12
>> Main# /cfg/slb/group 1
>> Real Server Group 1# ipver v6
>> Real Server Group 1# add 1
>> Real Server Group 1# add 2
>> Main# /cfg/slb/port 1
>> SLB Port 1# client ena
>> Main# /cfg/slb/port 2
>> SLB Port 2# client ena
>> Main# /cfg/slb/port 21
>> SLB Port 21# server ena
>> Main# /cfg/slb/port 22
>> SLB Port 22# server ena
>> Main# /cfg/slb/virt 1
>> Virtual Server 1# ena
>> Virtual Server 1# ipver v6
>> Virtual Server 1# vip abcd:0:0:0:0:0:0:100
>> Main# /cfg/slb/virt 1/service http
>> Virtual Server 1 http Service# group 1

Radware Alteon Specifications

General

Model	Alteon
Manufacturer	Radware
Layer	Layer 4-7
Type	Application Delivery Controller (ADC)
Features	Load balancing, SSL offloading, application acceleration, DDoS protection
Form Factor	Virtual Appliance