Radware Alteon User Manual

Alteon Application Switch Operating System Application Guide
Server Load Balancing
Document ID: RDWR-ALOS-V2900_AG1302 215
To configure a network class
1. Access the Network Class menu.
2. At the prompt, enter the network class ID you want to configure. The Network Class menu
displays.
3. To define the network class name for that ID, enter name. At the prompt, enter the name you
want to define.
4. To set a network element for the network class, enter network. At the prompt, enter the
network element ID you want to set. The Network Element menu displays.
5. Enter net to define the network element. At the prompt, do one of the following:
— Enter range to define a range of IP addresses, and the network match type.
— Enter subnet to define an IP address, a subnet mask, and the network match type.
For a description of all of the
/cfg/slb/nwclss commands, refer to the Alteon Application Switch
Operating System Command Reference.
>> # /cfg/slb/nwclss
[Network Class NWC1 Menu]
name - Set network class name
network - Network Element Menu
ipver - Set IP version
copy - Copy network class
del - Delete network class
cur - Display current network class
[Network Class NWC1 Network 123 Menu]
net - Set network element
del - Delete network element
cur - Display current network element
Enter network type [range|subnet] [subnet]: range
Enter from IP address []:
Enter to IP address []:
Enter network match type [exclude|include] [include]:
Enter network type [range|subnet] [range]: subnet
Enter IP address []:
Enter subnet mask []:
Enter network match type [exclude|include] [include]:

Radware Alteon Specifications

General

Model	Alteon
Manufacturer	Radware
Layer	Layer 4-7
Type	Application Delivery Controller (ADC)
Features	Load balancing, SSL offloading, application acceleration, DDoS protection
Form Factor	Virtual Appliance