Radware Alteon User Manual

Alteon Application Switch Operating System Application Guide
Load Balancing Special Services
284 Document ID: RDWR-ALOS-V2900_AG1302
3. Configure Group 1 for LDAP.
4. Configure and enable a virtual server IP address 1 on Alteon.
5. Set up the LDAP service for the virtual server, and add real server Group 1.
6. Enable LDAP load balancing.
7. Optionally, enable session reset for long LDAP connections.
8. Apply and save your configuration.
/cfg/slb/real 21/ena/rip 10.10.10.21/layer7/ldapwr e
(Configure and enable LDAP Write
Server 21)
/cfg/slb/real 22/ena/rip 10.10.10.22/layer7/ldapwr e
(Configure and enable LDAP Write
Server 21)
/cfg/slb/real 26/ena/rip 10.10.10.26/layer7/ldapwr e
(Configure and enable LDAP Write
Server 21)
>> # /cfg/slb/group 1
(Select real server Group 1)
>> Real server group 1 # metric roundrobin
(Specify the load-balancing metric for
Group 1)
>> Real server group 1 # add 20
(Add Real Server 20)
>> Real server group 1 # add 21
(Add Real Server 21)
>> Real server group 1 # add 22
(Add Real Server 22)
>> Real server group 1 # add 26
(Add Real Server 26)
>> # /cfg/slb/virt 1/vip 20.20.20.20
(Specify the virtual server IP address)
>> Virtual Server 1# ena
(Enable the virtual server)
>> Virtual Server 1# service ldap
(Specify the LDAP service)
>> Virtual Server 1 LDAP Service# group 1
(Select the real server group)
>> # /cfg/slb/virt 1/service ldap/ldapslb ena
>> # /cfg/slb/virt 1/service ldap/reset enable
>> Virtual Server 1 LDAP Service# apply
>> Virtual Server 1 LDAP Service# save

Radware Alteon Specifications

General

Model	Alteon
Manufacturer	Radware
Layer	Layer 4-7
Type	Application Delivery Controller (ADC)
Features	Load balancing, SSL offloading, application acceleration, DDoS protection
Form Factor	Virtual Appliance