EasyManuals Logo

Radware Alteon User Manual

Radware Alteon
842 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #347 background imageLoading...
Page #347 background image
Alteon Application Switch Operating System Application Guide
Offloading SSL Encryption and Authentication
Document ID: RDWR-ALOS-V2900_AG1302 347
5. Set the non-HTTP virtual service to be used in the defined virtual server.
Note: The back-end server listening port (rport) is set to 12345. For a different setting, rport
can be configured manually.
6. Optionally, import an Intermediate CA certificate or group and bind it to the SSL policy. For
details on Intermediate CA certificates and groups, see the section on the
/cfg/slb/ssl/
certs
menu in the Alteon Application Switch Operating System Command Reference.
To bind the intermediate CA certificate to the SSL policy use the following command:
7. Enable DAM or configure proxy IP addresses and enable proxy on the client port.
Example 3: Configuring an SSL Offloading Service with Back-End Encryption
1. Before you can configure an SSL offloading service, ensure that Alteon is configured for basic
SLB:
— Assign an IP address to each of the real servers in the server pool.
— Define an IP interface.
— Define each real server.
— Assign servers to real server groups.
— Enable SLB.
— Define server port and client port.
— Define virtual server.
For more information on how to configure Alteon for SLB, see Server Load Balancing, page 165
.
>> Main# /cfg/slb/virt 1/service 12345
Application usage:
http|https|ssl|dns|rtsp|wts|basic-slb
Enter application: ssl
(Define the service port and
select SSL as the service's
application type)
>> Virtual Server 1 12345 Service# group 1
(Associate the server group to be
used in that service)
>> Virtual Server 1 12345 Service# ssl
(Switch to the SSL menu under
the service menu)
>> SSL Load Balancing# srvrcert
Current SSL server certificate: none
Enter new SSL server certificate or group
[cert|group|none] [none]: cert
Enter new SSL server certificate: MyCert
(Associate the defined server
certificate)
>> SSL Load Balancing# sslpol myPol
(Associate the defined SSL Policy)
>> Main# /cfg/slb/ssl/sslpol myPol
(Enter the defined SSL policy)
>> SSL Policy myPol# intermca <cert|group> <cert/
group ID>
(Select the intermediate CA
certificate or group to be used)

Table of Contents

Other manuals for Radware Alteon

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Radware Alteon and is the answer not in the manual?

Radware Alteon Specifications

General IconGeneral
ModelAlteon
ManufacturerRadware
LayerLayer 4-7
TypeApplication Delivery Controller (ADC)
FeaturesLoad balancing, SSL offloading, application acceleration, DDoS protection
Form FactorVirtual Appliance