Alteon Application Switch Operating System Application Guide
ADC-VX Management
Document ID: RDWR-ALOS-V2900_AG1302 439
To load an AlteonOS image
This procedure upgrades both ADC-VX and ADC application images with a single operation, whether
the system is in standalone or ADC-VX mode.
1. Access the Active Switch Configuration Boot menu.
2.
Enter gtimg to load the AlteonOS image.
>> Standalone ADC - Main# boot
[Boot Options Menu]
virtual - Switch mode from Standalone to ADC-VX
image - Select software image to use on next boot
conf - Select config block to use on next boot
gtimg - Download new software image via FTP/TFTP/SCP
reset - Reset switch [WARNING: Restarts Spanning Tree]
cur - Display current boot options
>> Standalone ADC - Boot Options#gtimg
Enter image type [all|vx|adc]: all
ADC-VX Infrastructure Images:
ID Version Downloaded Image status
-- ------- ---------- ------------
1 28.1.0.5 17:41:28 Sun Jan 13, 2013 Idle
2 28.1.0.0 12:45:39 Wed Mar 31, 2013 Idle
3 28.1.0.1 17:41:28 Sun Jan 13, 2013 Idle
4 28.1.0.2 12:45:39 Wed Mar 31, 2013 Idle
Enter Image ID to be replaced (1-4): 2
ADC Application Images:
ID Version Downloaded Image status vADC IDs
-- ------- ---------- ------------ --------
1 17:41:28 Sun Jan 13, 2013 Incompatible -
2 28.1.0.0 12:45:39 Wed Mar 31, 2013 Active 6
3 28.1.0.2 17:41:28 Sun Jan 13, 2013 Active 7
4 28.1.0.3 12:45:39 Wed Mar 31, 2013 Active 10-12
5 28.1.0.4 17:41:28 Sun Jan 13, 2013 Active 15-20
6 28.1.0.5 12:45:39 Wed Mar 31, 2013 Idle 28
7 28.1.0.6 17:41:28 Sun Jan 13, 2013 Idle 1-5
8 28.1.0.7 12:45:39 Wed Mar 31, 2013 Idle
9 28.3.0.0 17:41:28 Sun Jan 13, 2013 Active 22
10 28.4.0.0 12:45:39 Wed Mar 31, 2013 Idle -
Enter Image ID to be replaced (1-10): 2
Enter hostname or IP address of FTP/TFTP/SCP server: 10.210.31.39
Enter name of file on FTP/TFTP/SCP server: AAS-28.1.0.12--IF-AlteonOS
Enter username for FTP/SCP server or hit return for TFTP server:
To Next Page
Loading...
