Alteon Application Switch Operating System Application Guide
Application Redirection
478 Document ID: RDWR-ALOS-V2900_AG1302
2. Configure RTSP cache servers and the IP addresses.
3. Define a group to load balance the RTSP cache servers.
4. Configure a redirection filter.
5. Enable Layer 7 lookup for the redirection filter 100.
6. Configure a default allow filter to facilitate traffic.
>> # /cfg/slb/real 1
>> Real server 1# rip 1.1.1.1
(Configure RTSP Cache Server 1)
>> Real server 1# ena
(Enable RTSP Cache Server 1)
>> Real server 1# /cfg/slb/real 2
>> Real server 2# rip 1.1.1.2
(Configure RTSP Cache Server 2)
>> Real server 2# ena
(Enable RTSP Cache Server 2)
>> Real server 2# /cfg/slb/real 3
>> Real server 3# rip 1.1.1.3
(Configure RTSP Cache Server 3)
>> Real server 3# ena
(Enable RTSP Cache Server 3)
>> Real server 3# /cfg/slb/real 4
>> Real server 4# rip 1.1.1.4
(Configure RTSP Cache Server 4)
>> Real server 4# ena
(Enable RTSP Cache Server 4)
>> # /cfg/slb/group 1
>> Real Server Group 1# add 1
(Add RTSP Cache Server 1 to Group 1)
>> Real Server Group 1# add 2
(Add RTSP Cache Server 2 to Group 1)
>> Real Server Group 1# add 3
(Add RTSP Cache Server 3 to Group 1)
>> Real Server Group 1# add 4
(Add RTSP Cache Server 4 to Group 1)
>> # /cfg/slb/filter 100
(Select the menu for filter 100)
>> Filter 100# action redir
(Set the action for redirection)
>> Filter 100# proto tcp
(Enter TCP protocol)
>> Filter 100# dport rtsp
(Enter service port for RTSP)
>> Filter 100# rport rtsp
(Enter redirection port for RTSP)
>> Filter 100# group 1
(Select RTSP cache server group 1)
>> Filter 100# adv/proxyadv
(Select the Advanced menu for filter
100)
>> Filter 100# Advanced# proxy disable
(Disable proxy)
>> Filter 100 Advanced# layer7/l7lkup ena
>> # /cfg/slb/filt 2048
(Select a default allow filter 2048)
>> Filter 2048# sip any
(From any source IP addresses)
>> Filter 2048# dip any
(To any destination IP addresses)
To Next Page
Loading...
Need help?
General