EasyManuals Logo

Radware Alteon User Manual

Radware Alteon
842 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #88 background imageLoading...
Page #88 background image
Alteon Application Switch Operating System Application Guide
VLANs
88 Document ID: RDWR-ALOS-V2900_AG1302
3. Configure the default gateways. Configure gateways 5 and 6 for VLANs 2 and 3, respectively.
Configure default gateway 1 for load-balancing session requests and as backup when gateways
5 and 6 fail.
Note: The IP address for default gateways 1 to 4 must be unique. IP addresses for default
gateways 5 to 259 can be set to the same IP address as the other gateways (including default
gateway 1 to 4). For example, you can configure two default gateways with the same IP address
for two different VLANs.
4. Add the VLANs to the gateways and enable them.
5. Apply and verify your configuration.
6. Optionally, configure the local networks using address and mask pairs to ensure that the VLANs
use the configured default gateways.
7. Apply and save your new configuration changes.
>> /cfg/l3/gw 5
(Select gateway 5)
>> Default gateway 5# addr 10.10.1.20
(Assign IP address for gateway 5)
>> Default gateway 5# /cfg/l3/gw 6
(Select default gateway 6)
>> Default gateway 6# addr 10.10.1.30
(Assign IP address for gateway 6)
>> Default gateway 6# /cfg/l3/gw 1
(Select default gateway 1)
>> Default gateway 1# addr 10.10.4.1
(Assign IP address for gateway 1)
>> /cfg/l3/gw 5
(Select gateway 5)
>> Default gateway 5# vlan 2
(Add VLAN 2 for default gateway 5)
>> Default gateway 5# ena
(Enable gateway 5)
>> Default gateway 5# /cfg/l3/gw 6
(Select gateway 6)
>> Default gateway 6# vlan 3
(Add VLAN 3 for default gateway 6)
>> Default gateway 6# ena
(Enable gateway 6)
>> Default gateway 6# /cfg/l3/gw 1
(Select default gateway 1)
>> Default gateway 1# ena
(Enable gateway 1 for all VLAN s)
>> Default gateway 1# /cfg/l3/cur
(View current Layer 3 settings)
>> Default gateway 1# /cfg/l3/frwd/local
(Select the local network menu)
>> IP Forwarding# add 10.10.0.0 255.255.0.0
(Specify the network for routers 1, 2, and
3)
>> IP Forwarding# add 172.21.2.0
255.255.255.0
(Specify the network for VLAN 2)
>> IP Forwarding# add 172.21.3.0
255.255.255.0
(Specify the network for VLAN 3)
>> IP Forwarding# apply
>> IP Forwarding# save

Table of Contents

Other manuals for Radware Alteon

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Radware Alteon and is the answer not in the manual?

Radware Alteon Specifications

General IconGeneral
ModelAlteon
ManufacturerRadware
LayerLayer 4-7
TypeApplication Delivery Controller (ADC)
FeaturesLoad balancing, SSL offloading, application acceleration, DDoS protection
Form FactorVirtual Appliance