Samsung WEC8050 - Page 73

WEC8500/WEC8050 (APC) Operation Manual v10.1 54
©Samsung Electronics America
[bridge address]
This command configures a bridge address. The ‘no’ parameter is used to clear the
configuration.
• bridge 1 address [MAC] [forward/discard] [IFNAME]
• no bridge 1 address [MAC] [forward/discard] [IFNAME]
Parameter
Description
MAC
MAC address. Entered in the format of HHHH.HHHH.HHHH.
forward/discard
• forward: Configures forward matching frame.
• discard: Configures discard matching frame.
IFNAME
Interface name of a bridge.
[bridge ageing time]
This command configures the age-out time of a bridge. The ‘no’ parameter is used to
clear the configuration.
• bridge-group 1 ageing-time [AGEINGTIME]
• no bridge-group 1 ageing-time
Parameter
Description
AGEINGTIME
age-out time (range: 10-1000000 s)
[bridge protocol]
This command creates a bridge in one of the IEEE 802.1Q Spanning-Tree Protocol
(STP), IEEE802.1s multiple STP (MSTP), or IEEE 802.1W Rapid STP (RSTP) protocol.
• bridge 1 protocol [PROTOCOL]
• no bridge 1 protocol
Parameter
Description
PROTOCOL
Protocol to configure (ieee/mstp/rstp)
• ieee: STP
• mstp: MSTP
• rstp: RSTP
[clear mac address-table]
This command deletes the filtering database of a default bridge.
• clear mac address-table [OPTION] [KIND] [WORD]
Parameter
Description
OPTION
Filtering database option (static/multicast)
• static: Filtering database item that is configured as static
• multicast: Filtering database item that is automatically
configured by the multicast protocol
KIND
Filtering database type (address/vlan/interface)