WEC8500/WEC8050 (APC) Operation Manual v10.1 55
©Samsung Electronics America
• address: Filtering database using a MAC address
• vlan: Filtering database using the VLAN information.
• interface: Filtering database using the interface information
[clear mac address-table dynamic]
This command deletes bridge operation among the filtering database of a default bridge.
• clear mac address-table dynamic [KIND] [WORD]
Filtering database type (address/vlan/interface)
• address: Filtering database using a MAC address
• vlan: Filtering database using the VLAN information.
• interface: Filtering database using the interface information
[clear mac address-table dynamic bridge]
This command deletes the filtering database of bridge operation.
• clear mac address-table dynamic bridge [BRIDGE_NAME]
• clear mac address-table dynamic [address/interface/vlan] [WORD]
bridge [NAME]
Filtering database type (address/vlan/interface)
• address: Filtering database using a MAC address
• vlan: Filtering database using the VLAN information.
• interface: Filtering database using the interface information
[show bridge]
This command retrieves bridge information.
• show bridge
[show interface switchport bridge]
This command retrieves the bridge information that is the layer 2 protocol characteristic
information of the current VLAN, of a switch port.
• show interface switchport bridge [BRIDGE_NAME]
To Next Page
