Function Variants Weighbridge ZEUS
Second Weighing
Vehicle has been loaded, or unloaded. To complete weight acquisition, follow these
steps:
Press F2 key (perform second weighing)
for input of memory number assigned to vehicle at the time of first System prompts
weighing.
Memory No.:0
a) You remember the number:
Overwrite by memory number.
Sample display:
Memory No:17
Display shows relevant vehicle number, for you to check.
VehNo: 345 XYZ
Correct, if need be, and acknowledge.
b) You do not remember the memory number:
Acknowledg
System prom
e default value (memory no. 0)
w input of vehicle number. pts for ne
VehNo: 345 XYZ
(Max. 10 digits)
Ack
ZEUS rep
nowledge input.
orts "Ready".
Con : tin Weigh
Contin: Weight
But note:
• ion.
t been entered upon first weighing, you can do it
, Identify Load).
If no first weighing has been performed yet, ZEUS returns to home posit
• If material number has no
now (see First Weighing
Insert weigh slip into printer and press key to acknowledge. First/second
hing operation is complete.
weig
DISOMAT
®
Opus – Operating Manual 0630 BV-H2313 GB
© Schenck Process GmbH, Darmstadt - 123 -
To Next Page
Loading...
