Seca mVSA 535 - Removing;Fitting the Magazine Holder (Devices with In-Ear Thermometer); Removing the Magazine Holder; Fitting the Magazine Holder

106 • secamVSA 535/seca mBCA 525
17-10-05-353-002g_10-2020 B
8.5 Removing/fitting the magazine holder (devices with in-ear thermometer)
Removing the magazine holder 1. Lift the magazine holder with a finger until the magazine holder comes out
of its catch.
2. Remove the magazine holder.
Fitting the magazine holder 1. Insert the magazine holder in the SmartBucket as shown in the illustration
below.
2. Push down the magazine holder until you hear it engage.
Click!