Operation • 73
English
17-10-05-353-002g_10-2020 B
Stopping a measurement procedure ► Stop the current measurement procedure before you start a new one.
You have the following options:
► Press the button: Save measurement procedure
► Assign anonymous measurement to a seca patient file: ➔ Assigning
anonymous measurement procedure to a seca patient file
► Press the button: Discard measurement procedure
Assigning anonymous
measurement procedure to a seca
patient file
To assign an anonymous measurement procedure to a patient file, proceed
as follows:
1. Log in ➔ Logging in.
2. Press the Patient tab.
You have the following options for continuing
• ➔ Calling up a seca patient file
• ➔ Creating a seca patient file
3. Confirm the Assign measurement? message.
The measurement procedure is assigned to the patient file.
4. Press the button.
The measurement procedure is saved.
6.4 Measuring bioimpedance
➔ Preparing a bioimpedance measurement
➔ Performing a measurement (with WiFi direct connection to the measuring
mat)
➔ Performing a measurement (without WiFi direct connection to the
measuring mat)
➔ Connecting the measuring mat
To Next Page
Loading...
