Seca mVSA 535 - User Accounts; Activating Initial User Accounts; Changing the Password for the Admin User Account

138 • secamVSA 535/seca mBCA 525
17-10-05-353-002g_10-2020 B
2. USER ACCOUNTS
2.1 Activating initial user accounts
The following user accounts are available on the device initially:
• Admin: (Configure and manage device)
• User: (Perform measurements and manage them).
The user accounts have to be activated in order to be able to use the device:
• ➔ Changing the password for the Admin user account
• ➔ Assigning a password to the User user account
Changing the password for the
Admin user account
1. Press the Login button.
The login window is displayed.
2. Press the input field.
The list of user accounts is displayed.
3. Press the Admin user account.
The account is displayed in the input field.
4. Press the input field.
5. Enter the initial administrator password “1357”.
You are prompted to change the password.
6. Enter a new administrator password.
NOTICE!
Data access by unauthorized persons
An insecure password may allow unauthorized persons to access
patient data or device settings.
► Select a password to satisfy your institution's security requirements.
7. Enter the password again.
The login window is displayed.
8. Activate the User user account ➔ Assigning a password to the User user
account.
➔ Activating initial user accounts
➔ Working with user accounts