Seca mVSA 535 - Adding Weight and Height

80 • secamVSA 535/seca mBCA 525
17-10-05-353-002g_10-2020 B
6.5 Adding weight and height
You can add the parameters weight and height as follows:
• In the Patient tab
• In the Vital signs tab
Your administrator can set up the device so that weight and height can be
received by compatible seca measuring devices:
► ➔ Receiving weight and height (seca 360° proximity)
► ➔ Receiving weight and height (seca 360° wireless)
NOTE
If you are uncertain of which options you can use, contact your
administrator.
You can also enter weight and height manually: ➔ Entering weight and height
manually.
➔ Receiving weight and height (seca 360° proximity)
➔ Receiving weight and height (seca 360° wireless)
➔ Entering weight and height manually