98 • secamVSA 535/seca mBCA 525
17-10-05-353-002g_10-2020 B
Using the Unsubmitted
measurements list
In the Unsubmitted measurements list, you can view and assess the
details of a measurement before submitting the measurement to the EMR
system. The list is available in the Patient and Vital signs tabs.
A measurement appears in the list under the following conditions:
• In the Measurements dialog window, press the Save button ➔ Saving
measurement temporarily and submitting it later.
• The measurement cannot be submitted because the connection to the
EMR system is interrupted.
To open the Unsubmitted measurements list, proceed as follows:
1. Log in ➔ Scanning EMR user ID (recommended).
2. Ensure that the Patient and Vital signs tabs are active.
3. Press the button.
The Unsubmitted measurements list is displayed:
NOTE
Measurements marked yellow (offline measurement) contain uncon-
firmed patient data – because the connection to the EMR system was
interrupted, for example.
➔ Confirm offline measurement (EMR system connection)
➔ Viewing details
➔ Submitting the measurement
➔ Deleting a measurement
To Next Page
Loading...
