Seca mVSA 535 - Setting up a Seca 360° Wireless Connection; Introduction

Setting up peripherals • 181
English
17-10-05-353-002g_10-2020 B
5.5 Setting up a seca 360° wireless connection
Introduction If you use devices from the seca 360° wireless system in your institution, e.g.
a measuring station, you can connect them to the
secamVSA 535/
seca mBCA 525. You can submit the parameters height and weight directly
to the device and adopt them in a seca patient file.
On the
secamVSA 535, the values also appear in the Vital signs tab.
In order to be able to communicate with devices from the
seca 360° wireless
system, the
seca 360° wireless module of the secamVSA 535/
seca mBCA 525 must be activated and a wireless group set up.
NOTE
• The device can only receive data, not transmit it, via the
seca 360° wireless connection.
• Follow the instructions in this section to achieve a stable connection
of the desired
seca 360° wireless devices and to prevent the
undesired integration of other devices.
• You should also follow the instructions for use for the
seca 360° wireless system devices being used.
➔ Introduction
➔ Activating/deactivating the seca 360° wireless module
➔ Setting up a seca 360° wireless connection
1. Messen
2. Senden
seca 360° wireless
3. Empfangen
4. Übernehmen
Beispiel-Darstellung:
Messstation seca 285 mit seca mVSA 535
1. Measure
2. Submit
3. Receive
4. Adopt
Example display:
seca 285 measuring station with seca mVSA 535