Seca mVSA 535 - Making Settings for Measuring Mode; Making Regional Settings

142 • secamVSA 535/seca mBCA 525
17-10-05-353-002g_10-2020 B
3. MAKING SETTINGS FOR MEASURING MODE
3.1 Making regional settings
CAUTION!
Loss of data, misinterpretation of measurements
Incorrect settings for date and time can lead to misinterpretation of
measurements.
► Standalone operation: Ensure that the date and time information on
the device is correct.
► Network operation: Ensure that the date and time information in the
seca PC software is correct. These settings are adopted by the
device.
1. Press the Settings tab.
2. Press the Regional settings button.
➔ Making regional settings
➔ Setting display brightness and volume
➔ Calibrating the touchscreen display
➔ Setting units of measurement
➔ Deactivating analysis modules
➔ Making presets for vital signs measurement