Making settings for measuring mode • 147
English
17-10-05-353-002g_10-2020 B
3.5 Deactivating analysis modules
1. Press the Settings tab.
2. Press the Analysis modules button.
All analysis modules are activated at the factory.
3. Press the checkboxes of all the analysis modules you would like
to deactivate.
The deactivated analysis modules are no longer displayed in the analysis
➔ Analyzing measurement.
4. To reactivate analysis modules, press the checkboxes of the
deactivated analysis modules again.
The reactivated analysis modules will again be displayed in the analysis
➔ Analyzing measurement.
NOTE
• If the analysis modules Energy and Health risk are deactivated, the
basic parameters Waist circumference and Physical Activity
Level will not be interrogated ➔ Measuring bioimpedance.
• Settings you make in this tab are active directly. You do not need to
save or confirm them.
To Next Page
Loading...
