Setting up peripherals • 173
English
17-10-05-353-002g_10-2020 B
5.3 Setting up a connection to the seca analytics 115 PC software
Introduction If you connect the device to the seca analytics 115 PC software, the
following functions are available:
• Synchronize patient and user data automatically ➔ Exporting patient
and user data manually.
•
seca directprint: Issue results reports directly from the device on a
network printer ➔ Viewing current measuring results.
A requirement is that the device is connected to the LAN or WiFi network of
your institution.
NOTE
• You specify the network printer for the
seca directprint function
directly in the
seca analytics 115 PC software.
• You should also follow the administrator manual for the
seca analytics 115 PC software.
Connecting the device
automatically (UDP)
1. Press the Peripherals tab.
2. Press the seca connect button.
The seca connect configuration dialog window opens.
➔ Introduction
➔ Connecting the device automatically (UDP)
➔ Connecting the device manually (TCP)
➔ Exporting patient and user data manually
➔ Setting up automatic export
➔ Setting up a LAN connection to the network (stationary operation)
➔ Setting up a WiFi connection (mobile operation)
seca 115
Server/Stand-Alone-PC
(seca mediator service)
Network-Printer
seca mBCA 525
seca mVSA 535
LAN/WiFi
LAN/WiFi
To Next Page
Loading...
