Seca mVSA 535 - Connecting the Blood Pressure Cuff; Connecting the Temperature Probe

34 • secamVSA 535/seca mBCA 525
17-10-05-353-002g_10-2020 B
Connecting the blood pressure cuff 1. Connect the tube coupling for the blood pressure cuff to the compressed
air connection of the device until you hear the tube coupling engage.
2. Stow the blood pressure cuff in the SmartBucketas shown in the
illustration below.
Connecting the temperature probe 1. Open the cover cap of the connection compartment.
2. Insert the connector for the temperature probe in the probe connection
completely as shown in the illustration below.
3. Close the cover cap of the connection compartment.
4. Push the temperature probe into the probe holder completely as shown in
the illustration below.
Click!
=> =>
=>
Press!
Click!
=>=>
=>